Support

Sampultu is a companion app for the KORG volca sample 2: a librarian and workbench for the instrument you already own. It runs on macOS and Android, and talks to the volca over a USB-MIDI cable.

macOS · Android volca sample 2 · firmware 1.10+

Compatibility: KORG volca sample 2, Mac and Android

Sampultu works with the KORG volca sample 2 over a USB cable, from a Mac or an Android phone or tablet.

Devices and minimum OS

  • Mac: macOS 12 Monterey or later, on Apple Silicon or Intel, from the Mac App Store.
  • Android phone and tablet: Android 7.0 or later, with MIDI support and USB host (OTG). Google Play only offers Sampultu to devices with MIDI support.
  • Sampultu isn't available for iPhone or iPad, and there is no Windows version.

Hardware

  • Required: a KORG volca sample 2. The original volca sample (first generation) is not supported.
  • A USB data cable for the volca's micro-USB port. A charge-only cable won't work.
  • On Android, usually a USB-OTG adapter or cable.

Connections

  • USB MIDI only, over the volca's micro-USB port. No Bluetooth or Wi-Fi.
  • On a Mac, connect the cable directly to the Mac rather than through a hub if the volca isn't found.
  • No internet or account is needed, apart from a one-time download if you separate stems.

Known limits

  • One program at a time: quit KORG's volca sample 2 Librarian before using Sampultu.
  • The volca's MIDI settings must match what the guide describes under “What the volca must be set to”.
  • Without a volca, CHOP, banks and snapshots still work for browsing and preparing sounds.

KORG and volca are trademarks of KORG Inc. Sampultu works with the volca sample 2 and is not affiliated with or endorsed by KORG.

What You Need

  • A KORG volca sample 2. The original volca sample is a different instrument and is not supported.
  • Firmware 1.10 or newer on the volca. KORG's updater reports your version and will update it if needed.
  • A USB data cable — the volca has a micro-USB port. On phones and tablets you may also need a USB-OTG adapter.
  • The instrument powered on, from batteries or a 9 V adapter.

Getting Connected

  1. Power on the volca sample 2 and connect it to your device with USB.
  2. Open Sampultu. It looks for a MIDI port that identifies itself as a “volca sample” and adopts the first one it finds — there is no device picker to work through.
  3. Once connected, the Samples screen fills in as it reads all 200 slots. That takes about twenty seconds. Settings shows the firmware.
  4. If nothing is found, check the cable and the power, then use Look Again. On macOS it is also under Device ▸ Look Again.

Troubleshooting

“Connect it with a USB cable and make sure it is powered on” won't go away.

Confirm the volca is on, that the cable is a data cable rather than charge-only, and that the firmware is 1.10 or newer. Then try Look Again, which on macOS is also under Device ▸ Look Again. Some USB hubs are unreliable — a direct port is worth trying before anything else.

A long upload seems to hang the volca.

Very large samples are sent as a single large MIDI message, and some setups need it delivered more slowly than others. Power-cycle the volca and try again. This is most likely on certain Android devices.

Stem separation asks to download about 75 MB.

That is the AI stem-separation model, and it is fetched once. The feature is optional, and after the download it works entirely offline.

Recording does nothing.

Recording needs microphone permission. Grant it when the app asks, or in your system settings, then try again.

Android says my phone or tablet isn't eligible to install.

Sampultu needs MIDI support, so Google Play hides it from devices that cannot host USB or BLE MIDI. Most modern phones and tablets qualify; some do not.

What can I do without the hardware connected?

The Chop screen — load a sound, slice it, audition the slices, and, after the one-time download, separate stems — works with no volca attached. So do Settings, Banks, where you can build, name and edit banks, and Snapshots, where you can browse, import and export backups. Reading or writing the instrument's slots and patterns, assigning samples to a bank, and applying a bank or a snapshot need the volca connected.

Frequently Asked

Does Sampultu send my samples anywhere?

No. Everything stays on your device, or goes only to your volca over USB, unless you explicitly export or share it yourself.

Does it include the factory sample library?

No. KORG distributes the volca sample 2 library with the hardware; Sampultu neither bundles nor redistributes it.

Where are the sample packs?

The Packs screen links out to third-party publishers such as drumkito.com and musicradar.com. You download a pack from their site, then import the files into Sampultu.

What formats can I import?

WAV and AIFF are decoded directly. MP3, M4A, FLAC, OGG, and even MP4 or MOV video — the audio track is used — go through your operating system's decoder. Everything is converted to the volca's native 31.25 kHz, 16-bit, mono format on import.

I don't have a volca sample 2. Is Sampultu for me?

Probably not — Sampultu is built around the instrument, and most of it needs the volca connected. If you want a sampler and chopper for any audio, see Chopmatic.

Still Stuck

Write in. Sampultu is made by one person, and email is the only channel — there is no ticket system and no account you need in order to ask. Contact explains what to include so it can be answered in one reply rather than five.

hello@madewithbestpractice.com

Not Affiliated with KORG

Sampultu is an independent app and is not affiliated with, sponsored or endorsed by KORG Inc. KORG and volca sample 2 are used only to identify compatible hardware. For problems with the instrument itself — firmware, hardware faults, warranty — please contact KORG or your retailer.

Soporte

Sampultu es una aplicación complementaria para el KORG volca sample 2: un gestor de biblioteca y un banco de trabajo para el instrumento que ya tiene. Funciona en macOS y Android, y se comunica con el volca mediante un cable USB-MIDI.

macOS · Android volca sample 2 · firmware 1.10+

Compatibilidad: KORG volca sample 2, Mac y Android

Sampultu funciona con el KORG volca sample 2 por cable USB, desde un Mac o un teléfono o tablet Android.

Dispositivos y sistema mínimo

  • Mac: macOS 12 Monterey o posterior, con Apple Silicon o Intel, desde la Mac App Store.
  • Teléfono y tablet Android: Android 7.0 o posterior, con soporte MIDI y USB host (OTG). Google Play solo ofrece Sampultu a dispositivos con soporte MIDI.
  • Sampultu no está disponible para iPhone ni iPad, y no hay versión para Windows.

Hardware

  • Imprescindible: un KORG volca sample 2. El volca sample original (primera generación) no es compatible.
  • Un cable USB de datos para el puerto micro-USB del volca. Un cable solo de carga no sirve.
  • En Android, normalmente un adaptador o cable USB-OTG.

Conexiones

  • Solo USB MIDI, por el puerto micro-USB del volca. Sin Bluetooth ni Wi-Fi.
  • En Mac, si no encuentra el volca, conecte el cable directamente al Mac en lugar de a un hub.
  • No hace falta internet ni cuenta, salvo una descarga única si separa stems.

Límites conocidos

  • Un programa a la vez: cierre el volca sample 2 Librarian de KORG antes de usar Sampultu.
  • Los ajustes MIDI del volca deben ser los que indica la guía en “Cómo debe estar configurado el volca”.
  • Sin un volca, CHOP, los bancos y las instantáneas siguen funcionando para explorar y preparar sonidos.

KORG y volca son marcas de KORG Inc. Sampultu funciona con el volca sample 2 y no está afiliado a KORG ni respaldado por KORG.

Qué Necesita

  • Un KORG volca sample 2. El volca sample original es un instrumento distinto y no es compatible.
  • Firmware 1.10 o posterior en el volca. El actualizador de KORG indica su versión y la actualiza si hace falta.
  • Un cable USB de datos: el volca tiene un puerto micro-USB. En teléfonos y tabletas puede necesitar además un adaptador USB-OTG.
  • El instrumento encendido, con pilas o con un adaptador de 9 V.

Cómo Conectarlo

  1. Encienda el volca sample 2 y conéctelo a su dispositivo por USB.
  2. Abra Sampultu. Busca un puerto MIDI que se identifique como «volca sample» y adopta el primero que encuentra: no hay ningún selector de dispositivo que recorrer.
  3. Una vez conectado, la barra superior muestra el dispositivo y su firmware, y la pantalla Samples se va rellenando mientras lee las 200 ranuras. Tarda unos veinte segundos.
  4. Si no encuentra nada, revise el cable y la alimentación y use Look Again. En macOS también está en Device ▸ Look Again.

Resolución de Problemas

El aviso «Connect it with a USB cable and make sure it is powered on» no desaparece.

Confirme que el volca está encendido, que el cable es de datos y no solo de carga, y que el firmware es 1.10 o posterior. Después pruebe Look Again, que en macOS también está en Device ▸ Look Again. Algunos concentradores USB no son fiables: merece la pena probar un puerto directo antes que cualquier otra cosa.

Una carga larga parece bloquear el volca.

Las muestras muy grandes se envían como un único mensaje MIDI de gran tamaño, y algunos equipos necesitan que se entregue más despacio que otros. Apague y encienda el volca e inténtelo de nuevo. Ocurre sobre todo en ciertos dispositivos Android.

La separación de pistas pide descargar unos 75 MB.

Es el modelo de separación de pistas por IA, y se descarga una sola vez. La función es opcional y, tras la descarga, funciona por completo sin conexión.

La grabación no hace nada.

Grabar requiere permiso de micrófono. Concédalo cuando la aplicación lo pida, o en la configuración del sistema, e inténtelo de nuevo.

Android dice que mi teléfono o tableta no es compatible.

Sampultu necesita compatibilidad MIDI, por lo que Google Play lo oculta en dispositivos que no admiten MIDI por USB o BLE. La mayoría de los teléfonos y tabletas actuales cumplen; algunos no.

¿Qué puedo hacer sin el hardware conectado?

La pantalla Chop —cargar un sonido, cortarlo, escuchar los fragmentos y, tras la descarga única, separar pistas— funciona sin ningún volca conectado. También funcionan Settings, Banks, donde puede crear, nombrar y editar bancos, y Snapshots, donde puede ver, importar y exportar copias de seguridad. Leer o escribir las ranuras y los patrones del instrumento, asignar muestras a un banco y aplicar un banco o una instantánea requieren el volca conectado.

Preguntas Frecuentes

¿Sampultu envía mis muestras a algún sitio?

No. Todo permanece en su dispositivo, o va únicamente a su volca por USB, salvo que usted mismo lo exporte o lo comparta de forma explícita.

¿Incluye la biblioteca de muestras de fábrica?

No. KORG distribuye la biblioteca del volca sample 2 con el hardware; Sampultu no la incluye ni la redistribuye.

¿Dónde están los packs de muestras?

La pantalla Packs enlaza a editores externos como drumkito.com y musicradar.com. Usted descarga un pack desde su sitio y después importa los archivos en Sampultu.

¿Qué formatos puedo importar?

WAV y AIFF se decodifican directamente. MP3, M4A, FLAC, OGG e incluso vídeo MP4 o MOV —se usa la pista de audio— pasan por el decodificador de su sistema operativo. Todo se convierte al formato nativo del volca de 31,25 kHz, 16 bits y mono al importarlo.

No tengo un volca sample 2. ¿Sampultu es para mí?

Probablemente no: Sampultu está pensado para el instrumento y casi todo requiere el volca conectado. Si busca un sampler y cortador para cualquier audio, vea Chopmatic.

Si Sigue Sin Funcionar

Escríbanos. Sampultu está hecho por una sola persona y el correo electrónico es el único canal: no hay sistema de tickets ni ninguna cuenta que necesite para preguntar. En Contacto se explica qué incluir para que podamos responder en un solo mensaje en lugar de cinco.

hello@madewithbestpractice.com

Sin Afiliación con KORG

Sampultu es una aplicación independiente y no está afiliada a KORG Inc. ni patrocinada o avalada por ella. KORG y volca sample 2 se usan únicamente para identificar el hardware compatible. Para problemas con el instrumento en sí —firmware, averías de hardware, garantía— póngase en contacto con KORG o con su distribuidor.