# Support | Sampultu by Best Practice

Source: https://sampultu.madewithbestpractice.com/support/
Last updated: 2026-11-15

> Setup, troubleshooting, and answers for Sampultu, the companion app for the KORG volca sample 2 by Best Practice.

# Support

Sampultu is a companion app for the KORG volca sample 2: a librarian and workbench for the instrument you already own. It runs on macOS and Android, and talks to the volca over a USB-MIDI cable.

macOS · Android volca sample 2 · firmware 1.10+

## Compatibility: KORG volca sample 2, Mac and Android

Sampultu works with the KORG volca sample 2 over a USB cable, from a Mac or an Android phone or tablet.

### Devices and minimum OS

- **Mac:** macOS 12 Monterey or later, on Apple Silicon or Intel, from the Mac App Store.
- **Android phone and tablet:** Android 7.0 or later, with MIDI support and USB host (OTG). Google Play only offers Sampultu to devices with MIDI support.
- Sampultu isn't available for iPhone or iPad, and there is no Windows version.

### Hardware

- **Required: a KORG volca sample 2.** The original volca sample (first generation) is not supported.
- A USB data cable for the volca's micro-USB port. A charge-only cable won't work.
- On Android, usually a USB-OTG adapter or cable.

### Connections

- **USB MIDI only**, over the volca's micro-USB port. No Bluetooth or Wi-Fi.
- On a Mac, connect the cable directly to the Mac rather than through a hub if the volca isn't found.
- No internet or account is needed, apart from a one-time download if you separate stems.

### Known limits

- One program at a time: quit KORG's volca sample 2 Librarian before using Sampultu.
- The volca's MIDI settings must match what the guide describes under “What the volca must be set to”.
- Without a volca, CHOP, banks and snapshots still work for browsing and preparing sounds.

KORG and volca are trademarks of KORG Inc. Sampultu works with the volca sample 2 and is not affiliated with or endorsed by KORG.

## What You Need

- A **KORG volca sample 2**. The original volca sample is a different instrument and is not supported.
- Firmware **1.10 or newer** on the volca. KORG's updater reports your version and will update it if needed.
- A **USB data cable** — the volca has a micro-USB port. On phones and tablets you may also need a USB-OTG adapter.
- The instrument **powered on**, from batteries or a 9 V adapter.

## Getting Connected

1. Power on the volca sample 2 and connect it to your device with USB.
2. Open Sampultu. It looks for a MIDI port that identifies itself as a “volca sample” and adopts the first one it finds — there is no device picker to work through.
3. Once connected, the Samples screen fills in as it reads all 200 slots. That takes about twenty seconds. Settings shows the firmware.
4. If nothing is found, check the cable and the power, then use **Look Again**. On macOS it is also under **Device ▸ Look Again**.

## Troubleshooting

### “Connect it with a USB cable and make sure it is powered on” won't go away.

Confirm the volca is on, that the cable is a *data* cable rather than charge-only, and that the firmware is 1.10 or newer. Then try **Look Again**, which on macOS is also under **Device ▸ Look Again**. Some USB hubs are unreliable — a direct port is worth trying before anything else.

### A long upload seems to hang the volca.

Very large samples are sent as a single large MIDI message, and some setups need it delivered more slowly than others. Power-cycle the volca and try again. This is most likely on certain Android devices.

### Stem separation asks to download about 75 MB.

That is the AI stem-separation model, and it is fetched once. The feature is optional, and after the download it works entirely offline.

### Recording does nothing.

Recording needs microphone permission. Grant it when the app asks, or in your system settings, then try again.

### Android says my phone or tablet isn't eligible to install.

Sampultu needs MIDI support, so Google Play hides it from devices that cannot host USB or BLE MIDI. Most modern phones and tablets qualify; some do not.

### What can I do without the hardware connected?

The **Chop** screen — load a sound, slice it, audition the slices, and, after the one-time download, separate stems — works with no volca attached. So do **Settings**, **Banks**, where you can build, name and edit banks, and **Snapshots**, where you can browse, import and export backups. Reading or writing the instrument's slots and patterns, assigning samples to a bank, and applying a bank or a snapshot need the volca connected.

## Frequently Asked

### Does Sampultu send my samples anywhere?

No. Everything stays on your device, or goes only to your volca over USB, unless you explicitly export or share it yourself.

### Does it include the factory sample library?

No. KORG distributes the volca sample 2 library with the hardware; Sampultu neither bundles nor redistributes it.

### Where are the sample packs?

The Packs screen links out to third-party publishers such as drumkito.com and musicradar.com. You download a pack from their site, then import the files into Sampultu.

### What formats can I import?

WAV and AIFF are decoded directly. MP3, M4A, FLAC, OGG, and even MP4 or MOV video — the audio track is used — go through your operating system's decoder. Everything is converted to the volca's native 31.25 kHz, 16-bit, mono format on import.

### I don't have a volca sample 2. Is Sampultu for me?

Probably not — Sampultu is built around the instrument, and most of it needs the volca connected. If you want a sampler and chopper for any audio, see [Chopmatic](https://madewithbestpractice.com/chopmatic/).

## Still Stuck

Write in. Sampultu is made by one person, and email is the only channel — there is no ticket system and no account you need in order to ask. [Contact](https://sampultu.madewithbestpractice.com/contact/) explains what to include so it can be answered in one reply rather than five.

[hello@madewithbestpractice.com](mailto:hello@madewithbestpractice.com?subject=Sampultu%20support)

## Not Affiliated with KORG

Sampultu is an independent app and is not affiliated with, sponsored or endorsed by KORG Inc. KORG and volca sample 2 are used only to identify compatible hardware. For problems with the instrument itself — firmware, hardware faults, warranty — please contact KORG or your retailer.
